FAG UCFL 210 Ball bearing
UCFL 210 Ball bearing
| Brand: SKF |
SKF
AB SKF (Swedish: Svenska Kullagerfabriken, 'Swedish Ball Bearing Factory') is a Swedish bearing and seal manufacturing company founded in Gothenburg, Sweden, in 1907. The company manufactures and supplies bearings, seals, lubrication and lubrication systems, maintenance products, mechatronics products, power transmission products, condition monitoring systems and related services globally.[2]
These oval flanged ball bearing units are compliant with JIS standards. They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective
| Dimensions | ||
| d | 50 mm | Bore diameter |
| d1 | ≈62.1 mm | Outer diameter of inner ring |
| A | 39 mm | Overall width |
| A1 | 15 mm | Flange width |
| A5 | 33 mm | Width including end cover |
| B | 51.6 mm | Width of inner ring |
| B4 | 9.5 mm | Distance from locking device side face to thread centre |
| Db1 | 115 mm | Top external diameter |
| H | 197 mm | Overall height |
| J | 157 mm | Distance between attachment bolts |
| L | 115 mm | Overall length |
| N | 19 mm | Diameter of attachment bolt hole |
| s1 | 32.6 mm | Distance from locking device side face to raceway centre |
| T | 54.6 mm | Overall unit width |
| THREADED HOLE | ||
| RG | 1/8-27 NPT | Housing thread for grease fitting |
| R1 | 25 mm | Axial position of the housing thread |
| Rα | 45 ° | Angular position of the housing thread |
| GREASE FITTING | ||
| DN | 6.589 mm | Diameter of head sphere of grease fitting |
| SWN | 11.11 mm | Hexagonal key size for the grease fitting |
| GN | 1/8-27 NPT | Thread of grease fitting |
| Calculation data | ||
| Basic dynamic load rating | C | 35.1 kN |
| Basic static load rating | C0 | 23.2 kN |
| Fatigue load limit | Pu | 0.98 kN |
| Limiting speed | 3 300 r/min | |
| Limiting speed with shaft tolerance h6 | ||
| Mass | ||
| Mass bearing unit | 2.15 kg | |
| Mounting information | ||
| Set screw | G2 | M10x1.25 |
| Hexagonal key size for set screw | 5.08 mm | |
| Recommended tightening torque for set screw | 16.5 N·m | |
| Recommended diameter for attachment bolts, mm | G | 16 mm |
| Recommended diameter for attachment bolts, inch | G | 0.625 in |
| Included products | ||
| Housing | FL 210/Y | |
| Bearing | UC 210 |